22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
+604-5885228
+604-5885228
lim_yew_teck
- All in one microscope
- ASIMETO MICROMETERS
- Machinery Division
- Measuring Tool
- Metrology Division
U TECH RESOURCES (M) SDN BHD
22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
KL Office
5, Jalan BPU 7,
Bandar Puchong Utama,
47120 Puchong,
Selangor, Malaysia.
+603-58808979
Johor Office
23, Jalan Ceria 24,
Taman Nusa Indah,
79100 Iskandar Puteri,
Johor, Malaysia.
+6010-5185858
5, Jalan BPU 7,
Bandar Puchong Utama,
47120 Puchong,
Selangor, Malaysia.
+603-58808979
Johor Office
23, Jalan Ceria 24,
Taman Nusa Indah,
79100 Iskandar Puteri,
Johor, Malaysia.
+6010-5185858
EV-2010
| Previous | 4 / 4 | Next |
EV series uses high precision marbles as the machine base stand, has a high capability / price ratio. Auto focus function as standard configures in this series. Lens installed with electrical sensor to make sure rotary to right position every time, and no need make image correction again after change enlarge rate, improve efficiency.
The electronic system of the EV series is advanced, it uses the new multi-axial light motor controlling card, in this way the controlling system very succinct. Special processor reduce electronic circuitry and connectors, improve stability greatly. Super high speed reading ability, work with our latest high accuracy reading scale make sure high resolution and high accuracy measurement.
The electronic system of the EV series is advanced, it uses the new multi-axial light motor controlling card, in this way the controlling system very succinct. Special processor reduce electronic circuitry and connectors, improve stability greatly. Super high speed reading ability, work with our latest high accuracy reading scale make sure high resolution and high accuracy measurement.
| X,Y,Z Measurement Travel (mm) | 200 x 100 x 150 |
| Overall dimensions (cm) | 135 x 72 x 165 |
| Machine weight | 160kg |
| Repeatability | 2 µm |
| Max table load | 20kg |
| Operation mode |
X Y Manual, Z motorized (control by mouse, keyboard) |
| Resolution | 0.5µm high accuracy reading scale |
| X,Y measurement precision | (2.7+ L/250) µm |
| Light Source system |
Software controlled 8 zone surface light and straight contour light |
| Structure | 00 grade granite base and mast |
| Lens |
High precision Tele-centric zoom lens with electrical sensor |
| Precision measuring head | UK RENISHAW precision touch probe |
| Magnification |
Optical enlarging rate 0.7-4.5x, image enlarging rate 30-200x |
| Vision system | 1280x1024 high resolution1/2” industrial camera |