22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
+604-5885228
+604-5885228
lim_yew_teck
- All in one microscope
- ASIMETO MICROMETERS
- Machinery Division
- Measuring Tool
- Metrology Division
U Tech Resources
22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
KL Office
5, Jalan BPU 7,
Bandar Puchong Utama,
47120 Puchong,
Selangor, Malaysia.
+603-58808979
Johor Office
23, Jalan Ceria 24,
Taman Nusa Indah,
79100 Iskandar Puteri,
Johor, Malaysia.
+6010-5185858
5, Jalan BPU 7,
Bandar Puchong Utama,
47120 Puchong,
Selangor, Malaysia.
+603-58808979
Johor Office
23, Jalan Ceria 24,
Taman Nusa Indah,
79100 Iskandar Puteri,
Johor, Malaysia.
+6010-5185858
Series 208 / 209 - Two and Three Point Internal Micrometers (2-12mm / .08-.5")
| Previous | 58 / 68 | Next |
Two and Three Point Internal Micrometers
Series 208 / 209
FEATURES
STANDARD ACCESSORIES
Series 208 / 209
FEATURES
-
Resolution:
Digital models: .00005'' / 0.001mm
Mechanical models: .0001'' / 0.001mm - Protection level IP65
- Ratchet Stop
- Setting Ring supplied
- Measuring contact points are designed to allow measurements near to the bottom of blind holes
- Models up to and including 6mm / .24'' have two measuing points, models (over 6mm / .24'') with three measuring points
STANDARD ACCESSORIES
- Battery (Digital models), Extension Rod (over 6-8mm range), S-wrench, Screwdriver, Setting Ring
- Warranty card, Instruction manual, Calibration certificate
| Mechanical Models | ||||
| Range | Accuracy | Rod Length | Extension Rod | Code No. |
| 2-2.5mm | 0.004mm | 12.5mm | 209-06-0 | |
| 2.5-3mm | 0.004mm | 12.5mm | 209-07-0 | |
| 3-4mm | 0.004mm | 22.5mm | 209-08-0 | |
| 4-5mm | 0.004mm | 22.5mm | 209-09-0 | |
| 5-6mm | 0.004mm | 22.5mm | 209-10-0 | |
| 6-8mm | 0.004mm | 53.5mm | 150mm | 209-11-0 |
| 8-10mm | 0.004mm | 53.5mm | 150mm | 209-12-0 |
| 10-12mm | 0.004mm | 53.5mm | 150mm | 209-13-0 |
| Digital Models | ||||
| Range | Accuracy | Rod Length | Extension Rod | Code No. |
| 2-2.5mm / .08-.1'' | 0.004mm | 12.5mm | 208-06-0 | |
| 2.5-3mm / .1-.12'' | 0.004mm | 12.5mm | 208-07-0 | |
| 3-4mm / .16-.2'' | 0.004mm | 22.5mm | 208-08-0 | |
| 4-5mm / .2-.24'' | 0.004mm | 22.5mm | 208-09-0 | |
| 5-6mm / .24-.28'' | 0.004mm | 22.5mm | 208-10-0 | |
| 6-8mm / .275-.35'' | 0.004mm | 53.5mm | 150mm | 208-11-0 |
| 8-10mm / .35-.425'' | 0.004mm | 53.5mm | 150mm | 208-12-0 |
| 10-12mm / .425-.5'' | 0.004mm | 53.5mm | 150mm | 208-13-0 |