22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
+604-5885228
+604-5885228
lim_yew_teck
- All in one microscope
- ASIMETO MICROMETERS
- Machinery Division
- Measuring Tool
- Metrology Division
U Tech Resources
22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
22, Lorong Asas Jaya 3,
Kawasan Industri Ringan
Asas Jaya,
14000 Bukit Mertajam,
Penang, Malaysia.
KL Office
5, Jalan BPU 7,
Bandar Puchong Utama,
47120 Puchong,
Selangor, Malaysia.
+603-58808979
Johor Office
23, Jalan Ceria 24,
Taman Nusa Indah,
79100 Iskandar Puteri,
Johor, Malaysia.
+6010-5185858
5, Jalan BPU 7,
Bandar Puchong Utama,
47120 Puchong,
Selangor, Malaysia.
+603-58808979
Johor Office
23, Jalan Ceria 24,
Taman Nusa Indah,
79100 Iskandar Puteri,
Johor, Malaysia.
+6010-5185858
LSP-5040
| Previous | 9 / 10 | Next |
LSP series is designed specially for large quantity repeated measuring. It with high speed, high efficiency and powerful functions. LSP series especially suits for large-amount section which requires high speed, high efficiency and high precision. It is a necessary and important equipment for a busy QC line.
LSP series uses high precision 00 class granite structure for the bracket, along with high precision work-table, which ensure the stability and precision of the machine body and the high precision of the measuring. three axis adopt the Panasonic AC servo motor & drivers, recognized by the whole industry as the most reliable system.
All the moving is controlled by a high speed high accuracy full closed-loop 32bit DSP controller in order to ensure a reliable high-speed measurement, and can provide 1um position accuracy, make sure high repeatability.
The software of LSP series has learning function, users just need measure the work piece manually one time, the software will record all the measuring process, this can be used for the later repeated measuring. User do not have to write any program and this largely simplify the operation.
All the LSP series can install the Renishaw touch probe and 3D software for 3D measurement.
Specification
Vision Software
LSP series uses high precision 00 class granite structure for the bracket, along with high precision work-table, which ensure the stability and precision of the machine body and the high precision of the measuring. three axis adopt the Panasonic AC servo motor & drivers, recognized by the whole industry as the most reliable system.
All the moving is controlled by a high speed high accuracy full closed-loop 32bit DSP controller in order to ensure a reliable high-speed measurement, and can provide 1um position accuracy, make sure high repeatability.
The software of LSP series has learning function, users just need measure the work piece manually one time, the software will record all the measuring process, this can be used for the later repeated measuring. User do not have to write any program and this largely simplify the operation.
All the LSP series can install the Renishaw touch probe and 3D software for 3D measurement.
Specification
| X,Y,Z Measurement Travel | 500x400x200 (mm) |
| Overall Dimensions | 130x90x175 (cm) |
| Machine Weight | 500kg |
| Repeatability | 2 micron |
| Max Table Load | 50kg |
| Operation Models | Automatic CNC control, by mouse, keyboard or joystick, Super high speed and high trusty Ethernet connect with computer |
| Resolution | 1 um |
| X,Y,Z Measurement Precision | (3 + L/200) micron |
| Light Source System | software controlled adjustable 4 ring 8 zone surface light and straight adjustable contour light |
| Structure | 00 grade granite base and mast |
| Lens | High precision motorized Tele-centric auto-zoom lens |
| Probe System | English RENISHAWprecision touch probe |
| Magnification | Optical enlarging rate 0.75-4.5x, image enlarging rate 30-200x |
| Moving System | Japanese Panasonics AC servo motor & driver |
| Vision System | High resolution CCD lens (1/2” SONY CCD sensor & special SPC) |
Vision Software